Fleck Water Softener

Always think about flow rates. Think about the number of shower heads and baths you have and the chances of using them all at the same time. For most folks, it is rare that all appliances and showers etc. will be used all at once so for the average home less than 2300 square feet a flow rate of 8 gallons per minute is more than enough. Every once in awhile we run across a customer that has multiple body shower sprays in a shower stall. The average jet package has 4 to 5 sprayers including the shower head. You need about 15 GPM to operate properly. In this case you want to size your softener based on an 18 gpm flow rate. In this application the Clack WS1 48,000 grain softener is the best choice.

‍

Yes, but Potassium will cost a lot more than salt.

‍

‍

Anywhere from one to two business days. Sometimes same day!

‍

If you have a problem with your equipment you can do two things. Call us and will walk you through the troubleshooting which is easy to do. If that does not work we will send a technician out to try to fix the problem. If it is before one year of installation date, then there is no trip charge. But after one year there will be a charge. If it is a defective part that is under warranty we will change it out on site and take the broken part back to ship to the manufacture. The customer has to do nothing when it comes to the manufacture. We will handle it all! The control valves have a five year warranty and the tanks have a ten year warranty.

‍

‍

Nothing, they are both cross link 10% resins and very durable and respected in the industry.

How long does the resin last.

A. Not every situation is the same but the average life of a good resin is ten years or more

Can I replace the resin once it goes bad.

A. Yes you can.

‍

‍

Most homes have a similar water main somewhere on the outside of the house. You can see the water comes out of the ground, goes to to a shut off valve of some sort and a hose bib for connecting a hose. The water then enters the house and is distributed to all the plumbing fixtures. We need to tie into this main to install the water softener if your house was not pre-plumbed with a loop when it was built. You can also see the vacuum breaker that supplies all the underground sprinklers for irrigation.

If you can describe the location of the water main when you call we can ask you a few questions and give you a accurate quote for what we refer to as a full line installation.

‍

‍

One gallon of water will dissolve 3 pounds of salt. So for pounds of salt, at least 3 gallons of water should be in the brine tank.

‍

The amount of salt placed into the brine storage tank has nothing to do with the amount of salt used during the regeneration cycle. Water will disolve and absorb salt only until it becomes saturated. A given amount of brine (salt saturated water) contains a specific amount of salt. Just make sure that there is at least enough salt for a regeneration cycle (8 lbs in the case of our unit).

‍

Installing a water conditioner/softener on your homes main water supply will increase the life and longevity of everything the treated water comes in contact with. Everything plumbing related in your home from your faucets to your major appliances (water heater, dishwasher, washing machine, etc) will benefit significantly from softened/conditioned water by eliminating unwanted scale build up that can eventually cause them to fail. This also means no more unwanted hard water spotting on your glassware, sinks/countertops, and shower/glass shower doors keeping them looking new for years while saving you time on cleaning. It has also been proven that by using softened water you can decrease the amount of soaps/detergents and cleaning products by as much as 50%! At Servall Water we custom build all of our water treatment systems based on the homes water quality and customer’s needs and wants. Because of this, we have the capability to design a system to remove chlorine, chloramines as well as a broad spectrum of other potentially harmful contaminants found in tap water to keep your family happy and healthy.

‍

By all means. Hard water actually reacts with some foods robbing them of taste. Peas are shriveled by hard water, stay round in soft water. Good tasting coffee is more easily prepared when soft water is used.

‍

Money Stretcher

The cost of your cleaning supplies will drop dramatically with conditioned water because you’ll use less soap … fewer harsh chemicals and detergents … to get the job done.

Dish Sparkler

Tired of streaks and spots on glassware and dishes? Conditioned water eliminates the problem, and helps your dishwasher last longer, too!

Hand Soother

Red, roughened hands are usually the by-product of hard water. Conditioned water caresses – doesn’t irritate.

Clothes Brightener

Clothes last longer; come out fresher, cleaner and softer when washed in conditioned water. Colors stay brighter too.

Body Refresher

Bring conditioned water to your bath or shower and you’ll feel a refreshing difference. You’ll wash “really clean” faster and without soap build up on your skin. You’ll come away more relaxed and refreshed.

Face Saver

Say good-bye to razor burn as your razor glides smoothly over your soft water conditioned face. Both your skin and blades will last longer.

Hair Pamperer

A conditioned water shampoo revives hair color and makes it more radiant and manageable.

Faucet Preserver

Hard water scale corrodes and plugs valves in water-using appliances and shortens service life and saves you money.

Hot Water Guard

Conditioned water adds longer life to your water by minimizing the scale build up created by hard water minerals and saves you money! Less energy is required (17% to 21%) to heat water in tanks without a scale build up.

Scrubbing Helper

Washing floors, tile, and woodwork goes much easier and faster with conditioned water, because it eliminates the film and soap scum that hard water causes.

Pipe Protector

Over a period of time scale forms to clog your plumbing. As the pipes clog, water flow is restricted and water pressure can be reduced dramitically. A water conditioning system minimizes this headache.

Stain Eliminator

All bathroom fixtures benefit from conditioned water. There will be no more unsightly rings, stains, or mineral build up to darken your porcelain or your day.

‍

‍

A water softener is a water treatment system where the calcium and magnesium carbonate (the minerals responsible for the hard water) which are dissolved in the water are replaced with either sodium chloride (salt) or potassium chloride. This is different from a water filter in that filters will generally remove chlorine, pesticides, bacteria (in some cases), and suspended particles (sand, sediment, etc). A filter will not remove dissolved solids (which are responsible for hard water).

‍

YES. While setting the computer controlled valve head is extremely easy, cutting into your main water line with a torch to place the water softener is not something the typical homeowner should do on their own.

‍

You may experience a slight water pressure drop from the water softener. However our water softeners feature 1″ ports for the maximum possible water flow and pressure.

You may have hard water if your soaps and laundry detergent don’t lather very well, if glasses and dishes are left with spots, or if colored clothing looks dull. Tubs and bathroom fixtures may be covered with an unsightly film. You can have your water tested by your water dealer or you may use a home water testing kit.

• Treated (or softened water) = 0
• Slightly hard = 1-2 grains per gallon (total grains x 17.1 equals ppm)
• Medium Hard = 3-7 grains per gallon (total grains x 17.1 equals ppm)
• Hard = 7-10.5 grains per gallon (total grains x 17.1 equals ppm)
• Extremely Hard Water = 10.5+ grains per gallon (total grains x 17.1 equals ppm)

Note: Each ppm of iron equals 4 grains per gallon of hardness.

We hope this page helped you understand how to determine your hardness. If you still have questions regarding hard water, please email us or call us anytime at the number below.

‍

As the water passes through a water softening appliance containing a bed of resin, the hardness (calcium and magnesium) present in the water is exchanged or swapped for sodium in the resin. When the available sodium has all been exchanged for calcium and magnesium, hard water is present in the softener outlet and the resin must be regenerated. Common salt is used to replenish the supply of sodium in the resin and the hardness is flushed to waste.